The product is mainly compounded from inorganic active ingredients such as silicates and lithium-based compounds. Containing lithium molecules, it is the only one that does not cause ASR (Alkali-Silica Reaction). Lithium-based materials have strong permeability. Active silicate ions undergo a chemical reaction with free calcium in concrete to form calcium silicate hydrate gel, which fills capillary pores and forms a three-dimensional network structure, thereby significantly enhancing the compactness and strength of concrete.
Advantages of Hardened Concrete Floors
1. Improved Compressive Strength: Mohs hardness can reach 7-9 grades (ordinary cement floors are about grade 4), and compressive strength is increased by 27%-65%.
2. Enhanced Wear Resistance: Wear resistance is improved by 6-10 times.
3. Improved Impermeability Protection: Effectively prevents the penetration of water, oil and chemical substances, with a permeability coefficient ≤0.022 CC/hour (tested under 1.83 meters of water pressure).
4. Dust-proof and Weathering-resistant: Permanently seals surface pores, reducing dust generation by 98.6%; resistant to ultraviolet rays and chloride ion erosion, extending service life by 10-15 years.
5. No post-maintenance costs.
6. Environmental Protection and Safety: Water-based formula, no VOC emissions, no pollution, non-toxic and non-flammable.
Application Scope:
1. Industrial Fields: Places with high requirements for wear resistance and impact resistance, such as factory workshops, warehouses, logistics centers, and auto repair shops.
2. Commercial and Public Facilities: Areas requiring dust prevention and easy cleaning, such as supermarkets, parking lots, airport runways, hospitals, and schools.
3. Special Environments: Can be used for new and old concrete, emery floors, terrazzo, and self-leveling floors, but is not suitable for non-cement base surfaces such as ceramics and metals.
Construction Steps:
1. Base Surface Treatment: Roughly grind the ground
2. Apply the material after using 100# grinding disc
3. Material Application: Spray or roll evenly at a dosage of 0.2-0.3kg/㎡. Keep the ground moist for 2-4 hours. After the material is completely dry, perform dry grinding or wet grinding.
4. The construction temperature is preferably 5-35℃ with air humidity ≤80%. In high-humidity environments, ventilation or dehumidification is required to ensure the ground is dry before applying the material.
5. Grind in sequence according to the grinding disc numbers.
6. Polish.
7. Daily maintenance only requires mopping with clean water; avoid using acidic cleaners.
Precautions:
1. Keep the packaging bucket sealed, store above 0℃, and the storage period is unlimited.
2. During transportation, check whether the packaging is intact and sealed. In case of leakage, clean with plenty of water.
3. The product is non-corrosive and non-toxic. Do not contact with acids, as it will form solid crystalline products.
